How To Tighten Bike Disk Brakes. With v brakes remember you want the brake pads. Take a piece of clean paper towel to touch the surface of the disc and gently press down with your thumb at the rubbing point to bend the disc backwards.
Turn a hex bolt using a 5 mm hex wrench counterclockwise to loosen the brake pad. See the new updated video here httpsyoutubeCCf11y3mGpcIf your bikes brakes are too slack or too tight then theyll need some attention. 2 Types of Bike Brakes.
When the caliper is loose and is freely moving around go and apply the brakes at the handlebars.
To adjust disc brakes all you need to do is pump the brakes a few times with the engine off start the engine pump the brakes a few more times and then make a few stops with the car. The disc brakes are now adjusted and will remain that way through normal use. This will result in tightening of the brake pads on the rim of the first bike tire. While there is pressure on the lever tighten each screw by only a 14 twist at a time before switching to the other bolt this will ensure that they are equally tightened and will bring the brake caliper back to center.
